A replacement steam separator can match the original vessel diameter and still leave its outlet flange out of line with the plant piping. Checking the flange elevation against field measurements before fabrication can spare the installation crew from reworking pipe during a shutdown.
Alps Welding is a Canadian geothermal equipment manufacturer. At our shop in Woodbridge, Ontario, we build custom pressure vessels, shell-and-tube heat exchangers and skid packages for geothermal power and industrial process heating.
How geothermal plants use vessels and heat exchangers
Steam separators in flash plants
When hot water from a geothermal well drops in pressure, part of it turns to steam. A separator directs that steam toward the turbine while the remaining mineral-rich water, called brine, leaves through a separate outlet. If the separator has removable internals, check that the largest section will fit through the access opening during maintenance.
Heat exchangers for power and process heat
In a binary power plant, geothermal fluid heats a second fluid inside a heat exchanger. The second fluid boils, and its vapour drives the turbine. A food processing plant can use geothermal heat to warm process water instead. The exchanger keeps the brine and the plant water in separate circuits.
Making room for maintenance
A vessel drawing locates a nozzle. The plant layout shows whether the crew can reach the flange bolts and lift the cover clear after installation. For a replacement vessel, send both drawings and mark the connections the new equipment has to match.
Dissolved minerals in geothermal brine can leave scale on exchanger tubes. The buildup slows heat transfer. If the design uses a removable tube bundle, reserve space on the layout to pull it clear of nearby piping or steelwork for cleaning.
For a skid package, mark each point where the plant piping will connect. On a separate power generation project, our shop built the condenser, its support frame and the connecting pipe spools for a steam turbine surface condenser package.
What to send for a geothermal equipment quote
Send your equipment datasheet and available drawings with the following details.
- Fluid composition, flow rates, design pressures and temperatures. For an exchanger, include the heat duty and operating conditions on both sides.
- Specified materials, nozzle sizes and flange ratings, plus field measurements for fixed connections and supports.
- Applicable construction code, inspection and testing requirements, delivery location and any shutdown date that sets the schedule.
Our mechanical engineering support includes calculations and fabrication drawings for the vessels and exchangers we build.


